Sinotruk 6x4 Refuse Compacting Truck 18m3 Garbage Compactor Truck
12R22.5 Tyres
Garbage compactor truck ,also called compactor garbage truck ,
garbage truck for sale , trash compactor , compression garbage
truck , refuse truck , garbage collection vehicle, waste truck
container garbage truck, compact garbage trucks, waste compactor
trucks, compactor garbage truck for sale etc. Garbage compactor
truck capacity from 3 cbm to 18cbm all available .
Advantage
1. Dual operation both at the rear of compactor garbage truck and
inside cabin , easy control
2. Famous brand hydraulic pump to drive hydraulic valve to keep
garbage compactor truck safety
3. Cheap price , one year warranty
4. Garbage bin lifting system could design as customer’s
requirement .
5. Lock system is operated by machinery hydraulic system can reduce
second pollution mostly.
Garbage type as following:
1. There are compactor truck ,swing arm type garbage truck,skip
garbage truck ,self- dump garbage truck ,sealed garbage truck ,arm
type garbage truck ..etc from our factory
2. With boat type bucket, squared type bucket, sealed type bucket,
trapezoidal bucket etc.
3. Dustbin can separate with truck body, so one truck with more
buckets
Specification
| Chassis model | ZZ1257N4341W | Chassis brand | SINOTRUK |
| Overall dimensions | 9800X2496X3048mm | Wheel base | 4325+1350mm |
| Front/rear wheel track | 2022, 1830/1830mm | Front/rear suspension | 1500, 2600mm |
| Approach/departure angle | 16/15° | Maximum speed | 90km/h |
| Cab | Configuration | HW76 a row and a half deluxe cab(with sleeping berth), allowable 3
passengers |
| Color | white, other color is optional |
| Engine | Model | WD615.69 |
| Emission | Euro 2 |
| Type | 6 cylinders, in-line, 4-stroke, water cooled, turbo inter- cooling,
direct injection, diesel engine |
| Rated power | 336hp, rated power speed 2200rpm |
| Displacement | 9726ml |
| Max.torque | 1350N.m |
| Bore x stroke | 126x130mm |
| Manufacturer | China National Heavy Duty Truck Group Co.,Ltd |
| Tire | Size | 12R22.5 tubeless tire |
| Number | 10+1 nos |
| Clutch | φ430 diaphragm clutch |
| Fuel tank | 400L iron oil tank |
| Front axle | HF, 7 ton |
| Rear axle | ST16, 16 ton |
| Drive form | 6x4 |
| Suspension | Multi leaf springs |
| Rated voltage | 24V, DC |
| Transmissions | Gearbox HW19710, 10 speed forward 2 reverse. |
| Steering device | Power assisted steering |
| Steering wheel | Left hand drive |
| If there is a slight change in the chassis parameters above, please
take the actual product as the standard |
| Refuse compactor structure parameters |
| Equipment |
| Structure | Body, sub frame, lifting rear part, the loading device, the
pushing-out plate, hydraulic and electric systems |
| Loading capacity | 18m3 |
| System of loading | Mechanized, rear loading |
| Modes of the pressing | Manual,semi-automatic,automatic,lifting rear part operation
manual,loading,pushing,pressing, pushing out automatic |
| Body |
| Version | All-metal |
| Shape | arc-shaped |
| Sidewalls | Sheet carbon steel (thickness: 4 mm) |
| Bottom | Sheet carbon steel (thickness: 4 mm) |
| Roof | Sheet carbon steel (thickness: 4 mm) |
| Front frame | Sheet carbonaceous steel (thickness: 5 mm) |
| Rear frame | n-shaped profile from sheet carbon steel (thickness:5 mm) |
| Basis | 120x120mm (thickness: 5 mm) |
| Loading bunker |
| Loading bunker | All-metal with sidewalls and a loading ladle |
| Volume | 1.8 m3 |
| Sidewalls | Sheet carbon steel (thickness: 4 mm) |
| Ladle floor material | Sheet carbon steel (thickness: 4 mm) |
| Liquid drain | Drainage channel,sewage tank |
| Working zone Lighting | 2 lamps |
| Mechanism of raising | Two hydraulic cylinders |
| Ensuring tightness | Between the body and lifting back part in the lower part profile
acid-proof rubber is used. |
| Pressing system |
| Features | Control mode diversification, bidirectional compression |
| Pressure | 16Mpa |
| Compaction ratio | 3.0:1 |
| Loading cycle | 25-30 second |
| Unloading cycle | 15-20 second |
| pressing mechanism | The giving plate and hinge related pressing plate moving on two
directing bars |
| Pressing mode | Automatic pressing (1 full cycle and continuous pressing) and controlling of each
cycle of pressing separately |
| Control of pressing | Control from the external panel on the bunker |
| Lifting rear part |
| Mechanism of lifting | Two hydraulic cylinders |
| Function description | Suitable for various rubbish bins |
| Others |
| Color and Logo | Optional |
| Standard configuration | Chassis,arc-shaped body,sub frame,rear lifting part,loading
bunker,pushing-out plate,hydraulic system,pressing system,sewage
tank,climbing ladder,pneumatic control. |
| Selective configuration | PLC electric automatic control,multifunctional rear lifting
part,rear handrail and footplate,other shapes of body,rear swing
arm,and etc. |
Compression Garbage Truck Pictures
